(+880)-1755060275

Faculty Profile

 

 

Shakhawat Parvez

Lecturer

 

 

                   

 

                           

Contact Information

Name of the Dept.

Department of Electrical & Electronic Engineering

Phone

+880-191-3730609

Email

shakhawat_parvez@niter.edu.bd,
shakhawat_parvez@yahoo.com

Academic Details

M.Sc

M. Sc. in Electrical and Electronic Engineering (ongoing), Khulna University of Engineering & Technology (KUET)

B.Sc

B. Sc. in Electrical and Electronic Engineering,
Khulna University of Engineering & Technology (KUET)

Employment History

Lecturer

National Institute of Textile Engineering & Research (NITER)

Department of Electrical & Electronic Engineering

January 2019 to Present

Lecturer

Daffodil International University
Department of Computer Science and Engineering
January 2016 to September 2018

 

Membership

2015 - Present

IEEE Photonics Society (as Student Member)

2015 – Present

IEEE Microwave Theory & Techniques Society (as Student Member)

2015 - Present

Institute of Engineers (IEB), Bangladesh (as Associate Member)

 

Awards & Recognition

2010 - 2014

Dean’s List award for excellent academic performance

2010 - 2014

Awarded KUET “Technical Scholarship

2014 - 2019

Research article presented at 9 different international IEEE conferences                                                                    

 

Research Interest

 1.    Nano-photonics; Photonic integrated circuits; Terahertz (THz) frequency Nanoelectronics

 2.    Metamaterials; RF and Microwave Ultra – Wideband (UWB) Filters; Antennas

Current Project

 1.    Developing Open Stub Band Pass Filter For UWB Applications

 2.    Effect of Polynomial Distribution on Microstrip Low Pass Filter

Publications

1.    Shakhawat Parvez*, M.N. Mollah,  "Analysis on Novel Metamaterial Resonator: A Critical Study to Enhance the Performance by Tuning Parameters," 2019 International Conference on Electrical, Computer and Communication Engineering (ECCE), Cox'sBazar, Bangladesh, 2019, pp. 1-5. [IEEEXplore Link]
2.    Shakhawat Parvez*, M.N. Mollah, ‘‘Quarter Wavelength Open Stub Band Pass Filter Based on Dumbbell Annular Ring Resonator For UWB Applications, 2017 IEEE Region 10 Humanitarian Technology Conference (R10-HTC), Dhaka, Bangladesh, pp. 827-830. [IEEEXplore Link
3.    Shakhawat Parvez*, N. Sakib, M.N. Mollah, ‘‘A Quasi-Elliptic Low Pass Filter Based on Complementary Split Ring Resonator With Sharp Selectivity and Wide Stopband, 2017 International Conference on Electrical, Computer and Communication Engineering (ECCE), Cox's Bazar, 2017, pp. 504-508. [IEEEXplore Link]

 4.    Shakhawat Parvez*, N. Sakib, M.N. Mollah, ‘‘A Novel Quasi-Lumped High Pass Filter with Multiple Transmission Zeros, 2017 International Conference on Electrical, Computer and Communication Engineering (ECCE), Cox's Bazar, 2017, pp. 895-898. [IEEEXplore Link]

 5.    Shakhawat Parvez*, N. Sakib, M.N. Mollah, ‘‘Chebyshev Quarter Wavelength Wideband Bandstop Filter Based on Dumbbell Annular Ring Resonator, 2017 International Conference on Electrical, Computer and Communication Engineering (ECCE), Cox's Bazar, 2017, pp. 891-894. [IEEEXplore Link]

 6.    Shakhawat Parvez*, N. Sakib, M. N. Mollah, "Chebyshev type-I low pass filter using annular ring resonator: A comparative performance analysis for different substrates," 2016 9th International Conference on Electrical and Computer Engineering (ICECE), Dhaka, 2016, pp. 182-185. [IEEEXplore Link]

 7.    Shakhawat Parvez*, N. Sakib, M. N. Mollah and M. A. Rashid, "Uniform high-Q factored 3:9 annular ring resonator in coupled-line bandpass filter: Design and applications," 2016 5th International Conference on Informatics, Electronics and Vision (ICIEV), Dhaka, 2016, pp. 1078-1082.  [IEEEXplore Link]

 8.    Shakhawat  Parvez*, N. Sakib, and N. Mollah, "The 1x1 annular ring: Bandwidth enhancement of microstrip asymmetric couple-line bandpass filter with superior matching and lower insertion loss," 2015 2nd International Conference on Electrical Information and Communication Technologies (EICT), Khulna, 2015, pp. 368-372. [IEEEXplore Link]

 9.    Shakhawat Parvez*, N. Sakib, and N. Mollah, "Dumbbell annular ring with circular patterned microstrip low-pass filter with higher selectivity, wider stopband and lower insertion loss," 2015 2nd International Conference on Electrical Information and Communication Technologies (EICT), Khulna, 2015, pp. 373-377. [IEEEXplore Link]

 10.    Shakhawat Parvez*, N. Sakib, and M. N. Mollah, "Demonstration on performance characteristics of microstrip low-pass filter for various substrates employing Tschebycheff distribution," 2015 International Conference on Advances in Electrical Engineering (ICAEE), Dhaka, 2015, pp. 125-128. [IEEEXplore Link]

 11.  Shakhawat Parvez*, N. Sakib, and M. N. Mollah, "Determination of appropriate substrate for microstrip low-pass filter employing square designed Tschebycheff distribution," 2015 18th International Conference on Computer and Information Technology (ICCIT), Dhaka, 2015, pp. 554-559. [IEEEXplore Link]

 12.  Shakhawat Parvez*, N. Sakib, and M. N. Mollah, "Advanced investigation on EBG structures: A critical analysis to optimize the performance of asymmetric couple-line bandpass filter," 2015 International Conference on Electrical Engineering and Information Communication Technology (ICEEICT), Dhaka, 2015, pp. 1-6. [IEEEXplore Link]

 13.  Shakhawat Parvez*, N. Sakib, and M. N. Mollah, "Investigation on EBG structures: A critical analysis to optimize the performance of asymmetric couple-line bandpass filter," The 8th International Conference on Software, Knowledge, Information Management and Applications (SKIMA 2014), Dhaka, 2014, pp. 1-7. [IEEEXplore Link]

For more details, please visit my
Google Scholar and Researchgate profile.


Welcome To NITER

Run by Bangladesh Textile Mills Association(BTMA)

National Institute of Textile Engineering and Research (NITER) is the first education institute running as a Public-Private-Partnership (PPP) organization under the Ministry of Textiles & Jute, GoB. It is located in its own campus at Nayarhat, Savar, Dhaka adjacent to the Dhaka-Aricha highway and enjoys excellent communication facilities connecting among important cities of the country. The total campus.

Read more

Call us

(+880)-1755 060 275

Why NITER

You are now at your turning point and you are going to make a decision which is perhaps the most Read more

BTMA

Bangladesh Textile Mills Association (BTMA) is the national trade organization of Primary Textile Industry  Read more

Achievement

The National Institute of Textile Engineering and Research (NITER) came under Read more

Innovations

The Public Private Partnership is a national policy initiated to accelerate the subsector’s.Read more

Key features

  • Technology based modern teaching method +

    Technology based modern teaching method
  • Free Wi-Fi Zone Campus +

    Free Wi-Fi Zone Campus
  • Affordable tuition fees with the best laboratory facilities in the country +

    Affordable tuition fees with the best laboratory facilities in the country
  • Own campus located on almost 14 acres of land +

    Own campus located on almost 14 acres of land
  • Constituent institute of the University of Dhaka +

    Constituent institute of the University of Dhaka
  • 1

Testimonial

  • We endeavor to equip our graduates with both technical knowledge and skills so that they may contribute to the industry, while achieving excellence as professionals.

    image Professor Dr. Mohammed Mizanur Rahman Principal. NITER
  • 1
  • 2

Our Departments

Textile Engineering

Textile Engineering The large and expanding textile and apparel industry in Bangladesh has been placing an increasing demand of highly skilled manpower that is creating a lot of job opportunities. There are demands for textile graduates in other areas of economic activities also.

Industrial and Production Engineering

Industrial and Production Engineering,(IPE) is a combination of mechanical engineering and industrial engineering and management science. It is a branch of engineering concerned with the development, improvement, implementation and evaluation of integrated.

Fashion Design and Apparel Engineering

Introduction A Program that prepares individuals to apply artistic principles and techniques to the professional design of commercial fashions, apparel, and accessories, and the management of fashion development projects.Includes instruction in apparel design; accessory design.

Computer Science & Engineering (CSE)

This program aims at providing both modern and practical education in CSE and preparing the students as groomed professionals to meet the ever growing demand of national and international ICT sector.

Electrical & Electronic Engineering (EEE)

NITER is a constituent institute of Dhaka University offers four-year undergraduate degree program in Electrical and Electronic Engineering. The bachelor degree program is spread over 8 semesters with 2 semesters per year.

Latest News & Events

Style Selector

Layout Style

Predefined Colors

Background Image