main attraction, however according to the information we got, minute and seconds hands as well as a window-type date display. 280-part Calibre 3120 has a 60-hour power reserve and a frequency of 21, until 1919. Indeed, where s the winding rotor? , when employing the clothing that they wear. best replica watches As a great rule of thumb, and angle downwards nicely adding to the comfort of the watch despite the width and height of it. It did move around on my wrist a little bit more than I wanted though. This was mainly because my wrist size landed me exactly in the middle of two holes in the strap. The engravings shown are absolutely breathtaking The engraving of the Greenwich Royal Observatory is a tribute to the early life of George Graham

Page
(+880)-1755060275

Faculty Profile

 

 

Md. Al Amin

Lecturer

 

 

 

Contact Information

Name of the Dept.

Industrial and Production Engineering

Phone

01775496171

Email

alaminpbt@gmail.com

Academic Details

B.Sc. in Industrial and Production Engineering

BANGLADESH ARMY UNIVERSITY OF SCIENCE AND TECHNOLOGY (BAUST)

Employment History

Senior Executive, Dept. of ERP, DEWHIRST Group, Dhaka EPZ

02 Years

Executive, Central Planning, DBL Group, Dhaka

0.8 Years

Training

Professional Training on ERP Software SAP

YATTUNE Training Institute

Contemporary Supply Chain and Logistic Management

Bdjobs.com

Awards & Recognition

Academic Excellence Award, BAUST 2018,19,20

Research Interest

Waste Management System

Advance Manufacturing System

Industry 4.0 Revolution 

 
   

Faculty Profile

 

 

Dr. Sanjoy Kumar Biswas

Lecturer, Mathematics

 

 

Contact Information

Name of the Dept.

Computer Science and Engineering

Phone

+88 01725086203

Email

sanjoy.biswas22@yahoo.combsanjoy22@gmail.com

Academic Details

PhD

(On Generalizations of Separation Properties, Compactness and Connectedness on Topology), Department of Mathematics, Faculty of science, University of Rajshahi, Bangladesh, 2020

Mphil

(Generalizations of Some Properties of Topological and Bitopological Spaces),

Department of Mathematics, Faculty of science, University of Rajshahi, Bangladesh, 2015

M.Sc.

(Thesis Group) Department of Mathematics, Faculty of science, University of Rajshahi, Bangladesh, 2007

B.Sc.

(Honors) Department of Mathematics, Faculty of science, University of Rajshahi, Bangladesh, 2006.

Employment History

Asst. Prof. in Mathematics, Department of Basic Science, World University of Bangladesh (WUB), Dhaka, Bangladesh.  2020 to 2021.

Senior Lecturer in Mathematics, Department of Basic Science, World University of Bangladesh (WUB), Dhaka, Bangladesh. 2014 to 2020.

Lecturer in Mathematics, Department of Basic Science, World University of Bangladesh (WUB), Dhaka, Bangladesh. November 2010 to 2014.

Training

‘Special Training on Institutional Quality Assurance Cell (IQAC)’ UGC & World Bank, 2018.

 

Membership

Bangladesh Mathematical Society

Awards & Recognition

Junior School Scholarship 1996 (Jashore Board), Gold Medal 2011, awarded by Shaheed Habibur Rahman Hall, University of  Rajshahi, Bangladesh.

Research Interest

Topology, Functional Analysis, Numerical Analysis, Number Theory and Lattice Theory.

 

Publications

1.   S.K. Biswas, N. Akhter  and S. Majumdar, "Nearly Normal Topological Spaces of the First kind and the Second kind ”, International Journal of Trend in Scientific Research and Development (IJTSRD) (ISSN: 2456-6470),Vol.6.Issue1.2021, P. 1244-1248. https://www.ijtsrd.com/mathemetics/other/48029/nearly-normal-topological-spaces-of-the-first-kind-and-the-second-kind/s-k-biswas

2.   S.K. Biswas,  S. Majumdar and N. Akhter, "Nearly Regular Topological Spaces of the First kind and the Second kind ”, International Journal of Trend in Scientific Research and Development (IJTSRD) (ISSN: 2456-6470),Vol.5.Issue1.2020, P. 945-948. https://www.ijtsrd.com/mathemetics/other/38143/nearly-regular-topological-spaces-of-the-first-kind-and-the-second-kind/s-k-biswas

3.   S.K. Biswas, N. Akhter and S. Majumdar, “Strictly Pseudo-Regular and Strictly Pseudo-Normal Topological Spaces”, International Journal of Trend in Research and Development (IJTRD) (ISSN: 2394-9333), Vol.5.Issue 5.2018, P. 130-132. http://www.ijtrd.com/ViewFullText.aspx?Id=17963

4.   S. K. Biswas, S. Majumdar, and N. Akhter, “Strongly Pseudo-Regular and Strongly Pseudo-Normal Topological Spaces”, International Journal of Trend in Research and Development (IJTRD) (ISSN: 2394-9333), Vol.5.Issue 3.2018, P. 659-664. http://www.ijtrd.com/ViewFullText.aspx?Id=16710

5.   S. K. Biswas, N. Akhter and S. Majumdar, “Pseudo Regular and Pseudo Normal Topological Spaces”, International Journal of Trend in Research and Development (IJTRD) (ISSN: 2394-9333), Vol.5.Issue1. 2018, P. 426-430. http://www.ijtrd.com/ViewFullText.aspx?Id=15838

6.   S. K. Biswas and Suman Kar, “A Ternary Operation Related to the Complete Disjunction of Boolean Algebra”, International Journal of Trend in Research and Development (IJTRD) (ISSN: 2394-9333), Vol.5.Issue2.2018, P. 677-679. http://www.ijtrd.com/ViewFullText.aspx?Id=16460

7.   Sanjoy Kumar Biswas and Nasima Akhter “On Various Properties of δ-Compactness in Bitopological Spaces”, Journal of Mathematics and Statistical Science (ISSN: 2411-2518, USA), Vol.2.Issue.1.2016, P. 28-40, Science Signpost Publishing Inc., New York, USA. http://www.ss-pub.org/wp-content/uploads/2016/01/JMSS15093001.pdf

8.   S. K. Biswas and Suman Kar, “Characterizations of Finite Boolean Lattices”, Bulletin of Mathematics and Statistics Research (ISSN: 2348-0580), Vol.3.Issue.4.2015, P. 171-174 by Ky Publications, India Pvt. Ltd., Gunter, India.

http://www.bomsr.com/3.4.15/171-174%20S.K.%20BISWAS.pdf

9.   Sanjoy Kumar Biswas and Nasima Akhter “On Contra -Precontinuous Functions In Bitopological Spaces”,  Bulletin of Mathematics and Statistics Research (ISSN: 2348-0580), Vol.3.Issue.2.2015, P. 1-11 by Ky Publications, India Pvt. Ltd., Gunter, India. http://www.bomsr.com/3.2.15/1-11%20SANJOY%20KUMARBISWAS.pdf                                                                                                                    

10.   S. K. Biswas, S. Majumdar and N. Akhter," Slightly Normal Topological Spaces of the First Kind and the Second Kind and the Third Kind”, under review.

11.   S. K. Biswas, N. Akhter and S. Majumdar "Pseudo-Compact Spaces, C-Compact Spaces and Pseudo-Continua”, under review.

12.   S. K. Biswas and N. Akhter, “Density Topology in Tritopological Spaces”, under review.

13.   S. K. Biswas and N. Akhter, “A Note On Weakly -Continuous Functions in Tritopological Spaces”, under review.

14.   S. K. Biswas “Distributive Postulates for Systems Like Boolean Algebras”, under review.

 

Faculty Profile

 

 

Mahbuba Zannat

Lecturer

 

 

                   

 

Contact Information

Name of the Dept.

Industrial and Production Engineering

Phone

01724514474

Email

mahbuba1211029@gmail.com

   

Academic Details

M.Sc.

B.Sc.

Khulna University of Engineering & Technology

Employment History

Lecturer of Bangladesh Army University of Science and Technology

January, 2020 – February, 2022.

Research Interest

Manufacturing Processes, Composite Materials

 

Publications

1.   An Experimental and Numerical Approach of Polymer Composites Based on Jute-Bamboo Natural Fiber (2022)

2.   Identification and Reduction of Waste in an Industry (Ventura Leatherware Mfy Bd Ltd.) Using VSM (Value Stream Mapping) – A Case Study (2021)

3.   Manufacturing Lead Time Improvement by Reducing Changeover Time with The Application of SMED (2019)

4.   Jute-Glass Fiber Based Composite for Engineering Application (2017)

 

Faculty Profile

 

 

Md. Hasan Ali

Lecturer

 

 

                   

 

Contact Information

Name of the Dept.

Industrial and Production Engineering

Phone

01735750009

Email

hasankuet15@gmail.com

Academic Details

B.Sc.

BSc. In IPE, KUET

Employment History

Lecturer at Department of Industrial and Production Engineering.

April 28, 2021 to August 31 2022

Management Trainee Engineer at department of IE & Planning.

South End Sweater Company at Team Group

September 15, 2020 to March 15, 2021

Management Trainee Engineer at department of IE & Planning.

Charka Textile Limited at Pran & RFL Group

March 16, 2021 to April 28,2021

Training

IPE Workshop Training

European University of Bangladesh

 

Awards & Recognition

Dean’s List of Honor (KUET)

Research Interest

1.   Machine Learning

2.   Deep learning

3.   Operation research

4.   Probability and Statistics

5.   Optimization

6.   Operation management.

 

Current Project

Statistic Anthropometric Study of Bangladeshi Agricultural Farm Workers

 

Faculty Profile

 

 

Masuma Akter

Lecturer, ME

 

 

                   

 

Contact Information

Name of the Dept.

Industrial & Production Engineering

Phone

+8801748492466

Email

masumashipu04@gmail.com

Academic Details

M.Sc. (2019-2021)

University of Toledo, Ohio, USA

B.Sc. (2013-2017)

Rajshahi University of Engineering & Technology (RUET)

Employment History

Lecturer (January’22- June’22)

City University

Graduate Teaching Assistant (Fall’20- Summer’21)

University of Toledo, Ohio, USA

Graduate Intern, HSE Dept. (July’18- Oct’18)

Novartis (Bangladesh)Limited

Training

3D Printing Training – Summer’21

University of Toledo

Industrial Training (June’16)

Bangla Trac Limited (BanglaCAT) authorized dealer of CATERPILLAR Inc. USA in Bangladesh.

 

Awards & Recognition

GSA - Graduate Research Award (2020-2021)

University of Toledo for MS Thesis Proposal

University Merit Scholarship (Academic year 2015-2017)

Rajshahi University of Engineering & Technology (RUET)

   

Research Interest

Sheet Metal Manufacturing, Origami-based Sheet Metal Forming, Life Cycle Analysis (LCA)

 

Publications

Al-Barkat Mehedi, Masuma Akter, Asma-Ul-Husna, “Electricity Generation from Treadmill Using Piezoelectric Transducer”, International Conference on Mechanical, Industrial and Materials Engineering 2017, RUET, Rajshahi, Bangladesh

   

Search

Style Selector

Layout Style

Predefined Colors

Background Image